■ Frequency range: 1kHz-1200MHz

■ Test voltage range: 1mV-10V

■ Easy to operate

■ Good frequency response, small standing wave coefficient (VSWR)

■ Frequency range: 5Hz-3MHz

■ Measuring voltage range: 50μV-300V, resolution: 0.1μV

■ Measurement display function: 4 1/2 digits VFD, dual display: the main display shows one reading, and the secondary display can call up other readings at will

   Absolute value: mV,V,W,dBm,dBV,dBmV,dBμV,Vp-p

   Relative value: dB,%,Max/Min

■ Software menu setting: measure power and dBm, set source load resistance arbitrarily

Measure dB,%, Max/Min reference value setting

Ground (GND), floating (Float) setting and safety warning

■ Standard RS232C interface, SCPI command programming support

■ Frequency range: 5Hz-5MHz

■ Measuring voltage range: 50μV-300V, resolution: 0.1μV

■ Measurement display function: 4 1/2 digits VFD, dual display: the main display shows one reading, and the secondary display can call up other readings at will

   Absolute value: mV,V,W,dBm,dBV,dBmV,dBμV,Vp-p

   Relative value: dB,%,Max/Min

■ Software menu setting: measure power and dBm, set source load resistance arbitrarily

Measure dB,%, Max/Min reference value setting

Ground (GND), floating (Float) setting and safety warning

■ Standard RS232C interface, SCPI command programming support

■ Measuring frequency range: 

   9kHz-3000MHz (coaxial detector)

   9kHz-1200MHz (probe)

■ Measuring voltage range: 1mV-10V

■ Measuring power range: -47dBm-33dBm, 20nW-2W (50Ω load)

■ Excellent frequency response and voltage standing wave coefficient (VSWR)

■ Measurement and display function: 4½-digit double-reading clear VFD display

   The main display shows one kind of reading, the auxiliary display can scroll to call up other readings

   Absolute value: mV, V, W, dB, dBV, dBmV, dBμV, Vp-p

   Relative value: dB, %, Max/Min, Comp

■ Automatic range and manual range conversion function.

■ With automatic zero adjustment function.

■ Standard USB_DEV interface, optional GPIB and RS232C interface

■ Software menu setting: measurement dB, %, Max/Min, Comp reference value setting

   Interface function setting: GPIB, RS232C