■ Freq: 20Hz-2MHz, resolution: 0.1mHz max.
■ Test Accuracy: 0.05%
■ Test Speed: Max.5.6ms
■ Auto-balance bridge technology, 4-terminal pair
■ High stability and consistency: up to 15 test ranges
■ High resolution: 7-inch, 800*600
■ High power:
Signal source: Voltage up to 20Vrms
Current up to 100mA
DC bias: Voltage up to±40V
Current up to 100mA
Up to 120A when controlling 6 sets of TH1778A
series DC Bias Current Source by external DC
Bias interface
Independent Voltage Source: ±10V programmable
output
■ 201 Points List Sweep Function
■ Multi-parameter Graphic Sweep Function
■ Arithmetical operation
■ Varactor diode automatic polarity function
■ Simultaneous testing for Ls-RDC
■ 10 bins sorting, sorting result with sound and light alarm
■ Storage space: Internal: 100 groups of setting file, 10 groups of gif images files
USB External: 100 groups of setting filess
■ Rich interfaces: USB HOST, USB DEVICE, LAN, HANDER,
GPIB (Optional), SCANER (Optional),
external DC BIAS control interface
■ High compatibility: Support SCPI commands, compatible
with KEYSIGHT E4980A, E4980AL, HP4284A etc
- Brief Introduction
TH2838H is a new generation impedance tester adopting the most advanced auto balance bridge theory in the world at present. With its 0.05% basic accuracy, speed up to 5.6ms, 20Hz-2MHz frequency range and impedance test range up to 1GΩ, this new impedance tester can meet all test demands of components and materials, especially for testing capacitor with low D and inductor with high Q. Four-terminal pair configuration can eliminate the effect of electromagnetic coupling in test cable, to extend the low limit of low impedance test 10 times than those testers with Five-pair configuration.
TH2838H supports 20V AC test signal and 40V DC Bias, new-added improved multi parameter list sweep/graphic analyze will help customers to extend the comprehensive evaluation ability on components.
TH2838H is a strong tool for the design, examination, quality control and production test of electronic components. Its excellent performances and functions provide a powerful tool for circuit design and development, as well as material (electronic material and non-electronic material) research and development.
TH2838H can realize various tests of commercial standards and military standards, such as IEC and MIL.
- Application
■ Passive component:
Impedance parameter estimation and performance analysis of capacitor, inductor, magnetic core, resistor, piezoelectric devices, transformers, chip components and network components
■ Semiconductor component
Parasitic parameter test and analysis of LED driver integrated circuit
C-VDC features of varactors
Parasitic parameter analysis of transistors or integrated circuit
■ Other components
Impedance assessment of printed circuit boards, relays, switches, cables, batteries
■ Dielectric material
Dielectric constant and loss angle evaluation of plastics, ceramics and other materials
■ Magnetic materials
Magnetic permeability and loss angle assessment of ferrite, amorphous body and other magnetic materials
■ Semiconductor materials
Dielectric constant, electrical conductivity and C-V characteristics of semiconductor materials
■ Liquid crystal cell
Dielectric constant, elastic constant and C-V characteristics of liquid crystal cell
- Technical Parameter
Model TH2838H Test Signal Source Output impedance 100Ω, ±1% @1kHz Frequency Range 20Hz-2MHz Resolution 20.0000Hz - 99.9999Hz 0.1mHz 100.000Hz - 999.999Hz 1mHz 1.00000kHz - 9.99999kHz 10mHz 10.0000kHz - 99.999kHz 0.1Hz 100.000kHz - 999.999kHz 1Hz 1.00000MHz - 2.00000MHz 10Hz AC test signal Rated value(ALC OFF):Set the voltage as the Hcur voltage when the test terminal is open Set the current as the Hcur current when the test terminal is short Constant value(ALC ON):Keep the voltage in DUT is the same as the set valueKeep the current in DUT is the same as the set value AC signal Voltage range F≤1MHz 5mVrms--20Vrms F>1MHz 5mVrms--15Vrms Resolution 5mVrms -- 0.2Vrms 100μVrms 0.2Vrms -- 0.5Vrms 200μVrms 0.5Vrms -- 1Vrms 500μVrms 1Vrms -- 2Vrms 1mVrms 2Vrms -- 5Vrms 2mVrms 5Vrms -- 10Vrms 5mVrms 10Vrms -- 20Vrms 10mVrms Current range 50μArms --100mArms Resolution 50μArms -- 2mArms 1 μArms 2mArms -- 5mArms 2 μArms 5mArms -- 10mArms 5 μArms 10mArms -- 20mArms 10μArms 20mArms -- 50mArms 20μArms 50mArms--100mArms 50μArms Rdc test Voltage range 100mV — 2V Resolution 100μV Current range 0mA— 20mA Resolution 1μA DC Bias Voltage range 0V — ± 40V Resolution 0V -- 5V 100μV 5V -- 10V 1mV 10V -- 20V 2mV 20V -- 40V 5mV Current range 0mA— ± 100mA Resolution 0 A -- 50mA 1μA 50mA -- 100mA 10μA Voltage source Voltage range -10V -- 10V Resolution 1mV Current range -45mA -- +45mA Output impedance 100Ω Display Dimensions /typ 7-inch (diagonal)TFT LCD display Proportion 16:9 Resolution 800×RGB×480 Test function Test parameter Cp-D,Cp-Q,Cp-G,Cp-RpCs-D,Cs-Q,Cs-RsLp-D, Lp-Q, Lp-G, Lp-Rp, Lp-RdcLs-D, Ls-Q, Ls-Rs, Ls-Rdc, RdcR-X, Z-θd, Z-θrG-B, Y-θd, Y-θrVdc-Idc Mathematics function A(X+B)+C, X is test parameter, A, B,C is input parameter Equivalent circuit Series, parallel Deviation measurement Absolute deviation Δ compared with the nominal valuePercentage deviation Δ% compared with the nominal value Calibration function OPEN, SHORT, LOAD Range selection AUTO, HOLD Range LCR 100mΩ, 1Ω, 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, total 15 ranges Rdc 1Ω, 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, total 15 ranges Trigger mode INT, MAN, EXT, BUS Trigger delay 0 s -- 999 s, resolution 100us Test terminal configuration Four-pair Test cable length 0m, 1m Test average 1-255 times Test time(ms) Speed mode 20Hz 100Hz 1kHz 10kHz 100kHz 1MHz 2MHz FAST 330 100 20 7.7 5.7 5.6 5.6 MED 380 180 110 92 89 88 88 LONG 480 300 240 230 220 220 220 Test display range a 1×10-18 ; E 1×1018 Cs, Cp ±1.000000 aF -- 999.9999 EF Ls,Lp ±1.000000 aH -- 999.9999 EH D ±0.000001 -- 9.999999 Q ±0.01 -- 99999.99 R, Rs, Rp, X, Z, Rdc ±1.000000 aΩ -- 999.9999 EΩ G,B,Y ±1. 000000 aS -- 999.9999 ES Vdc ±1.000000 aV -- 999.9999 EV Idc ±1.000000 aA -- 999.9999 EA θ r ±1.000000 a rad -- 3.141593 rad θ d ±0.0001 deg -- 180.0000 deg Δ% ±0.0001% -- 999.9999% t -99.99°C -- 1000.00°C Turn Ratio (extension pending) ±0.000000 -- 1000.000 Basic test accuracy 0.05% (the details refer to the instruction) List sweep Sweep points Up to 201 points Sweep Parameters Test frequency, AC voltage, AC current, DC BIAS voltage, DC BIAS current Trigger mode SEQ Once triggered, test at the sweep points. /EOM/INDEX will be output one time. STEP Once triggered, test at one sweep point. /EOM/INDEX will be output at each point, but the list sweep comparator results only be output at the last /EOM.
- Accessary
| Standard | |||||
| Accessories name | Model | ||||
| Four-end clamp with card | TH26005C | ||||
| Short circuit | TH26010 | ||||
| Kelvin test lead with box four-terminal insulation and lock | TH26011BS | ||||
| Optional | |||||
| Accessories name | Model | ||||
| Box patch test cable | TH26009B | ||||
| Magnetic ring fixture | TH26008A | ||||
| Dielectric test fixture | TH26077 | ||||