■ Freq: 20Hz-300kHz, resolution: 10mHz max.
■ Test Accuracy: 0.05%
■ Test Speed: Max.13ms
■ Transformer parameter test function
■ Selectable internal resistance of 30Ω, 50Ω and 100Ω
■ 201 Points List Sweep Function
■ Automatic level control (ALC) function for V and I
■ Test signal level monitor function for V and I
■ Included interior DC bias source
■ External DC bias source of large current
■ Built-in comparator:10-bin sorting and bin counter
■ Internal file storage and external USB-disk file storage
■ Test data can be saved to USB-disk directly
■ 4.3-inch TFT LCD display
■ Selectable Chinese and English operation interfaces
■ High compatibility: Support SCPI commands, compatible
with KEYSIGHT E4980A, E4980AL, HP4284A etc
- Brief Introduction
TH2827A is a new precision LCR meter with various functions and a higher test frequency. With small size and portable appearance, it is convenient for use on the shelves. This instrument has a basic accuracy of 0.05%, maximum test frequency of 300kHz and resolution of 10 mHz. It is easy to operate with a 4.3-inch LCD screen as well as selectable Chinese and English operation interfaces. Integrated transformer test function greatly improve the test efficiency. The instrument is also provided with multiple interfaces which can meet various requirements of the automatic sorting test, data transmission and storage.
- Application
- Technical Parameter
Model TH2827A Frequency of test signal Frequency 20Hz—300kHz Minimum resolution 10mHz, 4-digit frequency input Accuracy 0.01% Display 800×RGB×480 7-inch TFT LCD display ACLevel Voltage range of test signal 5mV—2Vrms Minimumresolution of voltage 100μV, 3-digit input Accuracy ALC ON 10% x set voltage + 2mV ALCOFF 6% x set voltage + 2mV Current range of test signal 100μA—20mA Minimumresolution of current 1μA, 3-digit input Accuracy ALC ON 10% x set current + 20μA ALCOFF 6% x set voltage + 20μA DCbias voltage source Voltage/Current range 0V— ±5V / 0mA—±50mA Resolution 0.5mV / 5μA Voltage accuracy 1% x set voltage + 5mV ISO ON Be used for the bias test of inductance and transformer AC Source impedance ISO ON 100Ω ISOOFF 30Ω、50Ω、100Ω selectable DCR source impedance 30Ω、50Ω、100Ω selectable Test parameters of LCR |Z|,Y|, C, L, X, B, R, G, D, Q, θ,DCR, Vdc-Idc Parameter display of test page One set of main/sub parameter,10-point list sweep Test parameters of transformer DCR1(primary, 2-terminal),DCR2(secondary, 2-terminal),M (mutual inductance), N, 1/N,Phase, Lk (leakage inductance),C(primary, secondary capacitance), Basic accuracy LCR test parameter 0.05% N 0.1% Calibration Warm-up time ≥ 30 seconds; Environment temperature:23±5ºC; Signal voltage: 0.3Vrms-1Vrms;Zeroing: After OPEN or SHORT;Length of test cable: 0 m Measurement time(≥10 kHz) Fast: 13 ms / timeMedium: 67 ms / timeSlow:187 ms / timePlus the refresh time of display character Display range ofLCR parameter Z, R , X，DCR 0.00001Ω — 99.9999MΩ |Y|,G,B 0.00001μs — 99.9999s C 0.00001pF — 9.99999F L 0.00001μH — 99.9999kH D 0.00001 — 9.99999 Q 0.00001 — 99999.9 θ(DEG) -179.999º — 179.999º θ(RAD) -3.14159 — 3.14159 Δ% -999.999% — 999.999% Equivalent circuit Serial, Parallel Range mode Auto, Hold Trigger mode Internal, Manual, External, Bus Average times 1-255 Calibration function Open,short calibration with full frequency or dot frequency,Load Math operation Direct reading, ΔABS, Δ% Delay time setup 0-999, minimum resolution: 100us Comparator 10-bin sorting, BIN1-BIN9, NG,AUX Bin counter PASS/FAIL on front panel,LED indication List sweep ·201 points list sweep·Frequency, AC voltage/current, internal/external bias voltage/ current can be swept.·Each sweep point can be sorted separately. Internal nonvolatilememory 40 sets of LCRZ setting files External USB memory GIF filesLCRZ setting filesTest data can be stored via USB memory directly. Interface I/O interface HANDLER on rear panel SCI USB、RS232C PCI GPIB (optional) NI LAN Memory interface USB HOST (front panel) General Specifications Operating temperature and humidity 0℃－40℃, ≤ 90%RH Power supply Voltage 99V-121V，198V-242V AC Frequency 47Hz-63Hz Consumption Max. 80 VA Dimension(W×H×D) 280 mm × 88 mm × 370 mm(with no sheath)369 mm × 108 mm × 408 mm(with sheath) Weight Approx. 5 kg
- Accessary
| Standard | |||||
| Accessories name | Model | ||||
| Transformer test fixture | TH26038 | ||||
| Fixture | TH26048 | ||||
| Short circuit | TH26010 | ||||
| Kelvin test lead with box four-terminal insulation and lock | TH26011AS | ||||
| Optional | |||||
| Accessories name | Model | ||||