■ Freq: 20Hz-2MHz, max. resolution 10mHz
■ Test Accuracy: 0.1%
■ Test Speed: 200 times/s
■ Multi-parameter with multi-frequencylist sweep function
■ Test level:10mV-5V with the resolution of 1mV
■ 320×240 dot-matrix large graphic LCD display
■ 5-digit display resolution
■ 22 parameter combinations available
■ 4 signal source output impedance
■ 10 points list sweep function
■ Built-in DC bias source
■ External AC bias up to 40A (option)
■ Auto level control (ALC) function of voltage or current
■ V,I test signal level monitor function
■ Graphic scanning and analyzing function
■ 20 groups of setting for storage/load
■ Built-in comparator, 10-bins and bin counters
■ Multiple communication interfaces
■ 2m/4m cable length extension
■ Optional Chinese and English language operating interface
■ Software upgrade through USB HOST
- Brief Introduction
TH2826A is a new generation impedance test instrument and firstly in conformity with LXI standard inland. It fulfills most low-voltage parameter measurement needs for components and materials with its basic accuracy (0.1%), wide frequency range(from 20Hz to 2MHz). The instrument is widely applied in microphone, resonator, inductor, ceramic capacitor, LCD, varactor and transformer .etc to analyze electrical performance and test low-ESR capacitor and high-Q inductor. With the super high test speed, TH2826A is especially for frequency response curve analyzing of detector and piezoelectric device on auto production line. Its multiple output impedance mode can be used for different standards of inductor or transformer manufacturers.
With its prominent performance, TH2826A is in conformity with commercial and military standards, such as IEC and MIL standards.
- Application
- Technical Parameter
Model TH2826A Test frequency 20Hz–2MHz with resolution of 10mHz Measurement Parameters C, L, R,Z,Y,X,B, G, D, Q, θ, DCR Test Level f≤1MHz 10mV–5V,±(10%+10mV) f>1MHz 10mV–1V,±(20%+10mV) Output impedance 10Ω, 30Ω, 50Ω, 100Ω Basic Accuracy 0.1% Display Range L 0.0001 uH – 9.9999kH C 0.0001 pF – 9.9999F R,X,Z,DCR 0.0001 Ω – 99.999 MΩ Y, B, G 0.0001 nS – 99.999 S D 0.0001 – 9.9999 Q 0.0001 – 99999 θ -179.99° – 179.99° Measuring Speed(meas/sec) Fast: 200(f>30kHz),100(f>1kHz)Med: 25, Slow: 5 Calibration function Open/Shot /load Equivalentmode Serial, Parallel Ranging Mode Auto and Hold Display Mode Direct, ABS, Rel Trigger Mode Internal, Manual, External, BUS Internal DC bias source Voltagemode -5V – +5V,±(10%+10mV), with the resolution of 1mV Currentmode(internal resistance is50Ω) -100mA – +100mA, ±(10%+0.2mA), with the resolution of 20uA Comparator function bins and bin counters Display 320×240 dot-matrix LCD display Memory groups of control settings can be saved Interface USB DEVICE( USBTMC and USBCDC support)
USB HOST(FAT16 and FAT32 support)
LAN(LXI class C support)
RS232C
HANDLER
GPIB(option)Working Temperature & Humidity 0°C − 40°C, ≤90%RH Power supply Voltage 99V−121V,198V−242V Frequency 47.5Hz−63Hz Power Consumption ≤ 80VA Dimensions (W×H×D) 400mmx132mmx385mm Weight Approx. 10kg
- Accessary
| Standard | |||||
| Accessories name | Model | ||||
| Fixture | TH26048 | ||||
| Short circuit | TH26010 | ||||
| Kelvin test lead with box four-terminal insulation and lock | TH26011BS | ||||
| Optional | |||||
| Accessories name | Model | ||||