■ Freq: 50Hz-200kHz, 12000 frequency points
■ Test Accuracy: 0.05%
■ Test Speed: Max. 33ms
■ 240×64 dot-matrix graphics LCD display
■ Friendly user's interface and easy operation
■ Programmable single-voltage level from 10mVrms to
2.0Vrms
■ World-level stability and accuracy
■ 6 digit readout resolution
■ Precision LOAD correction function
■ Selectable signal source output impedances: 30Ω, 100Ω
■ Direct control function for TH1773/TH1775 DC bias source
■ List sweep function for up to 4 frequencies, signal levels and
DC bias levels
■ Direct, Δ ABS and Δ% display modes
■ 12 control setting files memory
■ Built-in comparator, 10 Bins and bin counters (TH2816A/B)
■ Built-in comparator, 4 Bins and bin counters(TH2817A)
■ Test signal level monitor function
■ Key lock function
■ Handler interface
■ RS-232C and optional GPIB interfaces
- Brief Introduction
TH2816A is a new precision LCR meter combined with years of technical experience and newest measurement technology of instrument industry. With powerful measurement functions, high performance and low cost, TH2816A/TH2816B/TH2817A have been one of the world advanced instruments, and it provides users a super value measurement resolution and experience. The meter offers stable 6 digit resolution, wide frequency range (200kHz for TH2816A), programmable signal level (0.01V to 2.0V), up to 30 meas/sec measurement rate, 9 measurement ranges, 30Ω or 100Ω constant output impedance and friendly operation interface. TH2816Acan be used for incoming inspection of components, quality control of product line and high accuracy laboratory use. The HANDLER, GPIB, RS232C interfaces make it easy to build an automatic component test system,
- Application
■ Passive components:
Evaluation of Impedance Parameters for Capacitors, Inductors,
Cores, Resistors, piezoelectric devices, Transformers, Chip Components, and Network Components
■ Other components:
Impedance evaluation of printed circuit boards, relays, switches, cables, batteries, etc.
- Technical Parameter
Model
TH2816A
Measurement Function
Test Parameter
|Z|, C, L, X, B, R, G, D, Q, θ
Basic Accuracy
0.05%
Equivalent Circuit
Series and Parallel
Math Function
Deviation and Percent Deviation
Ranging Mode
Auto, Hold
Trigger Mode
Internal, Manual, External and Bus
Measuring Speed
Slow: 1.5meas/sec Med: 10meas/sec Fast: 30meas/sec
Correction Function
Open, Short and Load corrections
Measurement Terminal
5 terminals
Averaging Rate
1—255 , TH2816A/TH2817A only
Delay Time
0—60sec , with step of 1ms
List Sweep
List sweep for up to 4 frequencies, signal levels and DC bias levels
Display Mode
Direct, ΔABS, Δ%, V/I( V/I monitor), Bin number and bin counter
Display
240×64 dot-matrix LCD display, 6-digit resolution
Test Signal
Signal Frequency
50Hz to 200kHz over 12,000 points
Output Impedance
30Ω , 100Ω
Test Level
10mVrms to 2.0Vrms, 10mV steps
θ(RAD)
-3.14159 — 3.14159
Δ%
-999.999% — 999.999%
Comparator, memory & interface
Comparator
Function
Bins(BIN1 to BIN9 , OUT of bins), and additional AUX bin
Memory
Control settings memory for store/recall
Interface
RS-232C, HANDLER, GPIB (Optional)
Measurement Display Range
|Z|, R,X
0.00001Ω — 99.9999MΩ
C
0.00001pF — 999.999mF
L
0.00001μH — 9.99999kH
G,B
0.00001μS — 999.999S
D
0.00001 — 9.99999
Q
0.00001 — 99999.9
θ(DEG)
-179.999º — 179.999º
- Accessary
| Standard | |||||
| Accessories name | Model | ||||
| Four-end fixture | TH26005A | ||||
| Short circuit | TH26010 | ||||
| Kelvin test lead with box four-terminal insulation and lock | TH26011AS | ||||
| Optional | |||||
| Accessories name | Model | ||||
| Magnetic ring fixture | TH26008A | ||||
| Box patch test cable | TH26009B | ||||
| Box patch test cable | TH26029B | ||||